Cisco WAP150 Wireless-AC N Dual Radio Access Point with PoE


  • – Provides cost-effective 802.11ac connectivity with speed up to 1.2 Gbps
  • – Gigabit Ethernet LAN interface with Power over Ethernet (PoE) can enable flexible installation
  • – A captive portal can enable highly secure guest access with customized roles and rights
  • – Single Point Setup requires no controller, for easy, cost-effective deployment of multiple access points
  • – Works right out of the box with easy installation and a simple web-based configuration and wizard


Cisco WAP150 Wireless-AC N Dual Radio Access Point with PoE




Cisco Small Business


IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
System Requirements
10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included)
1 multifunction LED
Reset button, power on / off push button
Power Adapter
IEEE 802.3af Ethernet switch Cisco Power Injector – SB-PWR-INJ2-xx AC adapter – SB-PWR-12V / 1.5A power adapter in a box POE power Peak power: 9.5Watts


The concurrent dual-band radio supports up to 1.2 Gbps for increase capacity and coverage

Single Point Setup, a controller-less technology, simplifies the deployment and management of multiple access points, without requiring additional hardware

The Gigabit Ethernet LAN interface can enable a high-speed uplink to the wired network

Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect sensitive business information

A captive portal support supports highly secure, customized guest access with multiple rights and roles

Simple installation and an intuitive web-based configuration and wizard can enable fast, simple deployment and setup in minutes

Support for PoE powered device (PD) can enable easy installation without expensive additional wiring

Sleek design with multiple internal antennas

Versatile mounting can enable installation on a ceiling, wall, or desktop

Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance

Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network

Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades

Limited lifetime hardware warranty provides peace of mind

Dimensions & Weight

1.50″ x 5.31″ x 5.31
0.77 lbs.


Operating temperature: 0 degree to 40 degree C (32 degree to 104 degree F) Storage temperature: -20 degree to 70 degree C (-4 degree to 158 degree F)
Operating humidity: 10% to 85% noncondensing Storage humidity: 5% to 90% noncondensing


Package Contents
WAP150 Wireless-AC / N Dual Radio Access Point Power adapter 12V1.5A Quick-start guide Ethernet network cable